Košarica
Kategorije
24 mjeseci jamstva

HIVI K1 1" FABRIC DOME TWEETER

AUD1192_0,0(0),0,0
HiVi K1 | 1" | Fabric Dome Tweeter
DOSTUPNOST Na skladištu dobavljača
Gotovina:
15.27 15,27 € (115.05 kn)
Kartice:
16.07 16,07 € (121.08 kn)

Gotovina, pouzeće, virman, Visa, Master, Maestro jednokratno

Jednokratno Amex i Dinners, sve kartice na rate

Dostava 4,00 €, besplatno iznad 132,72 €

Dostupnost: Na skladištu

kol:
Općenito
Dodatni opis


Highlights


  • 3’’ magnesium alloy cone
  • Very linear response up to 25KHz
  • Broad directivity pattern thanks to the low-profile multiform cone
  • Long-stroke suspension with progressive-rate spider
  • Low profile surface-mount polymer basket

 

Product details


Markaudio CHN-50 3" Full-range Woofer

 

The CHN-50 is a very affordable compact 3-inch full-range driver suitable for use in small near field loudspeakers, as a quality mid-tweeter for low-crossover multi-way designs, and for line array speakers.

 

Markaudio has built a gentle rise into the low and high-frequency response, as seen in some of their premium drive units, to enhance positioning flexibility. The sound presentation is forgiving, without glare, and the Thiele / Small parameters, with a generous 3.5mm (1-way) Xmax, are balanced for ease of use.

 

The low-mass voice coil, suspension, and shallow profile magnesium alloy cone are unique to the CHN 50. The pressed steel frame is designed to be very open and allow airflow to be as free as possible to the rear of the cone. Response extends from resonance to beyond 20KHz, and the impedance rise at higher frequencies is only modest, due to the careful motor design.

 

Specifications


Article number: CHN-50
Woofer Type: Full-Range Woofer
Nominal Diameter: 3''
Power Handling (RMS): 7 Watts
Impedance (Z): 4 Ohms
Sensitivity: 85.74 dB 1W/m
Frequency Response: 80-25,000 Hz
DC Resistance (Re): 3.4 Ohms
Voice Coil Inductance (Le): 0.06 mH
Mechanical Q (Qms): 2.8318
Electromagnetic Q (Qes): 0.6865
Total Q (Qts): 0.5526
Diaphragm Mass Inc. Airload (Mms): 2.0871
Mechanical Compliance of Suspension (Cms): 0.982
Surface Area of Cone (Sd): 28 cm2
BL Product (BL): 2.6869
Compliance Equivalent Volume (Vas): 1.0965
Maximum Linear Excursion (Xmax): 3.5 mm (mechanical)
Cone / Diaphragm Material: Magnesium Alloy
Surround Material: Rubber
Basket / Frame Material: Stamped Steel
Magnet Material: Ferrite
Overall Outside Diameter: 102.9 mm
Overall Depth: 45.6 mm
Baffle Cutout Diameter: 70.0 mm
# Mounting Holes: 5